Datasheet
1245
SAM9M10 [DATASHEET]
6355F–ATARM–12-Mar-13
1: Input Stream Buffer is empty but the picture is not ready.
Software must provide a new stream pointer to hardware. Hardware will not self-reset.
• ASOD: ASO Detected
0: No ASO detected.
1: Interrupt status flag ASO detected.
Hardware has encountered Arbitrary Slice Order tool in the input H.264 stream data, and software must perform entropy
decoding. Hardware will self-reset.
• ISE: Input Stream Error
0: No error.
1: Interrupt stream error occurs.
When high, hardware has encountered a bit error in the input stream data, and software must perform error concealment.
Hardware will self-reset.
•TO: Timeout
0: No timeout
1: Timeout occurs
When high, decoder has made no bus transactions in 2
18
-1 clock cycles and has not set an interrupt. Possible only if time-
out interrupting is enabled. This should be considered as an encountered error in the input stream.
Note: Post-processor transactions affect this feature; running stand-alone post-processing while decoding may prevent decoder time-
out interrupts.