Datasheet

1048
SAM9M10 [DATASHEET]
6355F–ATARM–12-Mar-13
45.5.2 Power Management
The LCD Controller is not continuously clocked. The user must first enable the LCD Controller clock in the Power
Management Controller before using it (PMC_PCER).
45.5.3 Interrupt Sources
The LCD Controller interrupt line is connected to one of the internal sources of the Advanced Interrupt Controller.
Using the LCD Controller interrupt requires prior programming of the AIC.
LCDC LCDD11 PE14 B
LCDC LCDD11 PE18 A
LCDC LCDD12 PE15 B
LCDC LCDD12 PE19 A
LCDC LCDD13 PE16 B
LCDC LCDD13 PE20 A
LCDC LCDD14 PE17 B
LCDC LCDD14 PE21 A
LCDC LCDD15 PE18 B
LCDC LCDD15 PE22 A
LCDC LCDD16 PE23 A
LCDC LCDD17 PE24 A
LCDC LCDD18 PE19 B
LCDC LCDD18 PE25 A
LCDC LCDD19 PE20 B
LCDC LCDD19 PE26 A
LCDC LCDD20 PE21 B
LCDC LCDD20 PE27 A
LCDC LCDD21 PE22 B
LCDC LCDD21 PE28 A
LCDC LCDD22 PE23 B
LCDC LCDD22 PE29 A
LCDC LCDD23 PE24 B
LCDC LCDD23 PE30 A
LCDC LCDHSYNC PE4 A
LCDC LCDMOD PE1 A
LCDC LCDPWR PE0 A
LCDC LCDVSYNC PE3 A
Table 45-2. I/O Lines (Continued)
Table 45-3. Peripheral IDs
Instance ID
LCDC 23