Datasheet

891
SAM9G25 [DATASHEET]
11032C–ATARM–25-Jan-13
40.7.18 ADC Write Protect Mode Register
Name: ADC_WPMR
Address: 0xF804C0E4
Access: Read-write
• WPEN: Write Protect Enable
0 = Disables the Write Protect if WPKEY corresponds to 0x414443 (“ADC” in ASCII).
1 = Enables the Write Protect if WPKEY corresponds to 0x414443 (“ADC” in ASCII).
Protects the registers:
“ADC Mode Register” on page 874
“ADC Channel Sequence 1 Register” on page 876
“ADC Channel Sequence 2 Register” on page 877
“ADC Channel Enable Register” on page 878
“ADC Channel Disable Register” on page 879
“ADC Extended Mode Register” on page 887
“ADC Compare Window Register” on page 888
“ADC Trigger Register” on page 890
• WPKEY: Write Protect KEY
Should be written at value 0x414443 (“ADC” in ASCII). Writing any other value in this field aborts the write operation of the WPEN
bit. Always reads as 0.
31 30 29 28 27 26 25 24
WPKEY
23 22 21 20 19 18 17 16
WPKEY
15 14 13 12 11 10 9 8
WPKEY
76543210
–––––––WPEN