Datasheet

741
SAM9G25 [DATASHEET]
11032C–ATARM–25-Jan-13
• SCLWS: Clock Wait State (automatically set / reset)
This bit is only used in Slave mode.
0 = The clock is not stretched.
1 = The clock is stretched. TWI_THR / TWI_RHR buffer is not filled / emptied before the emission / reception of a new character.
SCLWS behavior can be seen in Figure 37-29 on page 727 and Figure 37-30 on page 728.
• EOSACC: End Of Slave Access (clear on read)
This bit is only used in Slave mode.
0 = A slave access is being performing.
1 = The Slave Access is finished. End Of Slave Access is automatically set as soon as SVACC is reset.
EOSACC behavior can be seen in Figure 37-31 on page 729 and Figure 37-32 on page 729.