Datasheet

1017
SAM9G25 [DATASHEET]
11032C–ATARM–25-Jan-13
• PTZ: Pause Time Zero
Set when the pause time register, 0x38 decrements to zero. Cleared on a read.
45.6.9 Interrupt Enable Register
Name: EMAC_IER
Address: 0xF802C028
Access: Write-only
• MFD: Management Frame sent
Enable management done interrupt.
• RCOMP: Receive Complete
Enable receive complete interrupt.
• RXUBR: Receive Used Bit Read
Enable receive used bit read interrupt.
• TXUBR: Transmit Used Bit Read
Enable transmit used bit read interrupt.
• TUND: Ethernet Transmit Buffer Underrun
Enable transmit underrun interrupt.
• RLE: Retry Limit Exceeded
Enable retry limit exceeded interrupt.
• TXERR
Enable transmit buffers exhausted in mid-frame interrupt.
• TCOMP: Transmit Complete
Enable transmit complete interrupt.
• ROVR: Receive Overrun
Enable receive overrun interrupt.
• HRESP: HRESP not OK
Enable HRESP not OK interrupt.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
– – PTZ PFR HRESP ROVR – –
76543210
TCOMP TXERR RLE TUND TXUBR RXUBR RCOMP MFD