User manual

AT91SAM9G20-EK Evaluation Board User Guide 7-1
6413C–ATARM–18-Feb-09
Section 7
Revision History
7.1 Revision History
Table 7-1.
Document Comments
Change
Request
Ref
6413C
Section 6.3 ”SD Card Slots and Booting Capability”, added to errata 6874
6413B Errata section created with
Section 6.1 ”Wrong Silkscreen of BB and 1.0V on the Board” 5413
Section 6.2 ”Choice of an Oscillator Capacitance” added to errata 6392
New schematics pdf file (at91sam9g20-ek revc.pdf) attached to
Section 5.1 ”Schematics” 5936
-
Section 1.2 ”Deliverables” on page 1-1, last bullet added
-
Section 3.8 ”Power Supply Circuitry” on page 3-5, last bullet added
- PA23-24 rows edited in
Table 3-1 on page 3-7
- 2 rows (J33-34) added to Table 4-1 on page 4-1
5851
- Section 1.3 ”AT91SAM9G20-EK Evaluation Board” on page 1-1: ‘one’ DataFlash changed to ‘two’
- 3 figures changed: Figure 2-1 on page 2-2, Figure 2-2 on page 2-3, and Figure 2-3 on page 2-5
- Typo in Section 2.6 ”Getting Started” on page 2-4: ‘tools’ instead of ‘tool’
- 4 bullets removed from
Section 3.11 ”User Interface” on page 3-6
- 2 bullets edited in Section 3.13 ”Expansion Slot” on page 3-6
- PA6 to PA11 rows edited in Table 3-1 on page 3-7
- PB0 and PB8-9 rows edited in Table 3-2 on page 3-8
- A paragraph added at the end of Section 4.5 ”Ethernet” on page 4-3
RFO
6413A First Issue