Datasheet

1161
SAM9G15 [DATASHEET]
11052D–ATARM–31-Oct-12
ADC:
Section 41.8.15 “ADC Compare Window Register”, added two paragraphs about programming LOWTHRES and
HIGHTHRES bitfields depending on the LOWRES bitfield settings (ADC Mode Register).
Increased the size of XPOS/XSCALE/YPOS/YSCALE fields from 10 to 12-bit in Section 41.8.19 “ADC
Touchscreen X Position Register”, Section 41.8.20 “ADC Touchscreen Y Position Register” and Section 41.8.21
“ADC Touchscreen Pressure Register”.
Section 41.6.4 “Conversion Results”, removed “...and EOC bit corresponding to the last converted channel” from
the last phrase of the third paragraph.
Section 41.2 “Embedded Characteristics”, added the value of Conversion Rate in the 2nd line.
8045
8229
8357
8385
SSC:
Section 43.7.1.1 “Clock Divider”, removed Table 43-4 related to Figure 43-5 “Divided Clock Generation”
(duplicated data in Section 43.7.1.4 “Serial Clock Ratio Considerations”).
Section 43.6.3 “Interrupt”, replaced AIC references with “interrupt controller”.
Section 43.9 “Synchronous Serial Controller (SSC) User Interface”:
- updated descriptions of CKS, CKO, and CKG bitfields in:
Section 43.9.3 “SSC Receive Clock Mode Register”
Section 43.9.5 “SSC Transmit Clock Mode Register”
- updated register tables and a description of FSOS bitfield in:
Section 43.9.4 “SSC Receive Frame Mode Register”
Section 43.9.6 “SSC Transmit Frame Mode Register”
Section 43.9.14 “SSC Interrupt Enable Register”, fixed a typo (0=0= --> 0=).
7303
8466
Electrical Characteristics:
Section 45.5 “Main Oscillator Characteristics”, replaced minimum CCRYSTAL value of 17.5 with 15 in Table 45-7
“Main Oscillator Characteristics” and in the corresponding note. Updated the related values in the same note.
Section 45.5.1 “Crystal Oscillator Characteristics”, added maximum and minimum CCRYSTAL values for ESR in
Table 45-8 “Crystal Characteristics”.
Section 45.2 “DC Characteristics”, updated RPULLUP parameter characteristics in Table 45-2 “DC
Characteristics”.
Replaced “Input Leakage Current” with “Input Peak Current” in Table 45-26 “Analog Inputs”.
8098
8147
rfo
Mechanical Overview:
Updated the table title in Table 46-4 “Package Information”.8186
Errata:
Section 48.1.1 “EBI: Data lines are Hi-Z after reset”, updated the problem description and fix/ workaround.
Removed sections concerning PIO and RTC.
Added Section 48.2 “Reset Controller (RSTC)”, Section 48.3 “Static Memory Controller (SMC)”, and Section 48.4
“USB High Speed Host Port (UHPHS) and Device Port (UDPHS)”.
Added Section 48.5 “LCD Controller (LCDC)”.
Removed “Boot Sequence Controller (BSC)” section (see “Boot Strategies” and “BSC” above for the related
modifications).
8250
8321
rfo
Doc. Rev.
11052D
Comments Change
Request
Ref.