Datasheet
43
SAM9260 [SUMMARY]
6221LS–ATARM–15-Oct-12
13. Revision History
Table 13-1. Revision History - current version appears first
Revision Comments Change
Req. Ref.
6221LS
Removed: 208-pin Package and 217-ball package outlines: Formerly Figure 4-1 and Figure 4-2.
Added: Figure 11-1 ”217-ball LFBGA: Ball A1 Position” and Figure 11-3 ”208-lead PQFP: Pin 1
Position”.
Changed document format: pagination has changed.
8450
6221KS Document title and name of product updated to conform to AT91SAM Marketing standards:
AT91SAM ARM-based MPU. AT91SAM9260 now referenced in text as SAM9260.
”Features”, removed SDCard from System list, boot possibilities.
7142
6221JS Line added to Debug Unit 5846
Note edited after Table 10-1, “SAM9260 Peripheral Identifiers” on page 29 5854
‘Manchester Encoding/Decoding’ removed from USART 5933
Section 6.6 “Shutdown Logic Pins” on page 13 edited 6030
Features list shortened and reorganized, from new structure in Datasheet AT91SAM9G45 RFO
6221IS
Section 12. “SAM9260 Ordering Information” on page 42, New Ordering codes for Version B
added.
5686
Table 3-1, “Signal Description List”, Image Sensor Interface, ISI_MCK line, added comments.
Table 10-3, “Multiplexing on PIO Controller B”, PB31 line, removed ISI_MCK.
Table 3-1, “Signal Description List”, Reset/Test, BMS line, added comments.
5330
5422
6221HS ”Power Considerations”,in Section 5.1 ”Power Supplies”, VDDCORE and VDDBU startup
voltage restraints removed.
5229
6221GS Updated all references to 217-ball LFBGA to Green package. Review
In Section 5.1 “Power Supplies” on page 12, VDDCORE and VDDBU, added information on
supply voltage during startup.
Review
In Section 6.5 “I/O Line Drive Levels” on page 13, added information on PC4 to PC31. Review
In Section 6.7 “Slow Clock Selection” on page 14, corrected startup delay for internal RC
oscillator.
Review
In Section 10.4.6 “Multimedia Card Interface” on page 35, corrected specification version
compatibility.
4944
In Section 8.1.1 “Boot Strategies” on page 20, removed sentence “When REMAP = 1, BMS is
ignored.”
5026
Changed divider value for Master Clock Controller in Figure 9-3, “SAM9260 Power
Management Controller Block Diagram,” on page 27.
4833
Corrected package reference to PQFP in Figure 11-4, “208-lead PQFP Package Drawing,” on
page 40.
4740
Updated BGA ordering code in Section 12. “SAM9260 Ordering Information” on page 42. 4768