Datasheet

29
SAM9260 [SUMMARY]
6221LS–ATARM–15-Oct-12
10. Peripherals
10.1 User Interface
The peripherals are mapped in the upper 256 Mbytes of the address space between the addresses 0xFFFA 0000 and
0xFFFC FFFF. Each User Peripheral is allocated 16 Kbytes of address space. A complete memory map is presented in
Figure 8-1 on page 19.
10.2 Identifiers
Table 10-1 defines the Peripheral Identifiers of the SAM9260. A peripheral identifier is required for the control of the
peripheral interrupt with the Advanced Interrupt Controller and for the control of the peripheral clock with the Power
Management Controller.
Table 10-1. SAM9260 Peripheral Identifiers
Peripheral ID Peripheral Mnemonic Peripheral Name External Interrupt
0 AIC Advanced Interrupt Controller FIQ
1 SYSC System Controller Interrupt
2 PIOA Parallel I/O Controller A
3 PIOB Parallel I/O Controller B
4 PIOC Parallel I/O Controller C
5 ADC Analog to Digital Converter
6 US0 USART 0
7 US1 USART 1
8 US2 USART 2
9 MCI Multimedia Card Interface
10 UDP USB Device Port
11 TWI Two-wire Interface
12 SPI0 Serial Peripheral Interface 0
13 SPI1 Serial Peripheral Interface 1
14 SSC Synchronous Serial Controller
15 - Reserved
16 - Reserved
17 TC0 Timer/Counter 0
18 TC1 Timer/Counter 1
19 TC2 Timer/Counter 2
20 UHP USB Host Port
21 EMAC Ethernet MAC
22 ISI Image Sensor Interface
23 US3 USART 3
24 US4 USART 4
25 US5 USART 5
26 TC3 Timer/Counter 3
27 TC4 Timer/Counter 4
28 TC5 Timer/Counter 5