Datasheet

SAM7X Series [DATASHEET]

6120K–ATARM–11-Feb-14

13.3.3 Reset Controller Mode Register

Access Type: Read-write

• URSTEN: User Reset Enable

0 = The detection of a low level on the pin NRST does not generate a User Reset.

1 = The detection of a low level on the pin NRST triggers a User Reset.

• URSTIEN: User Reset Interrupt Enable

0 = USRTS bit in RSTC_SR at 1 has no effect on rstc_irq.

1 = USRTS bit in RSTC_SR at 1 asserts rstc_irq if URSTEN = 0.

• BODIEN: Brownout Detection Interrupt Enable

0 = BODSTS bit in RSTC_SR at 1 has no effect on rstc_irq.

1 = BODSTS bit in RSTC_SR at 1 asserts rstc_irq.

• ERSTL: External Reset Length

This field defines the external reset length. The external reset is asserted during a time of 2

(ERSTL+1)

Slow Clock cycles. This

allows assertion duration to be programmed between 60 µs and 2 seconds.

•KEY: Password

Should be written at value 0xA5. Writing any other value in this field aborts the write operation.

31 30 29 28 27 26 25 24

KEY

23 22 21 20 19 18 17 16

–––––––BODIEN

15 14 13 12 11 10 9 8

–––– ERSTL

76543210

– – URSTIEN – – – URSTEN