Datasheet

559
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
37.5.9 Interrupt Enable Register
Register Name: EMAC_IER
Access Type: Write-only
• MFD: Management Frame sent
Enable management done interrupt.
• RCOMP: Receive Complete
Enable receive complete interrupt.
• RXUBR: Receive Used Bit Read
Enable receive used bit read interrupt.
• TXUBR: Transmit Used Bit Read
Enable transmit used bit read interrupt.
• TUND: Ethernet Transmit Buffer Underrun
Enable transmit underrun interrupt.
• RLE: Retry Limit Exceeded
Enable retry limit exceeded interrupt.
• TXERR
Enable transmit buffers exhausted in mid-frame interrupt.
• TCOMP: Transmit Complete
Enable transmit complete interrupt.
• ROVR: Receive Overrun
Enable receive overrun interrupt.
• HRESP: Hresp not OK
Enable Hresp not OK interrupt.
• PFR: Pause Frame Received
Enable pause frame received interrupt.
• PTZ: Pause Time Zero
Enable pause time zero interrupt.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
– – PTZ PFR HRESP ROVR –
76543210
TCOMP TXERR RLE TUND TXUBR RXUBR RCOMP MFD