Datasheet

347
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
Figure 31-13. Transmit and Receive Frame Format in Edge/Pulse Start Modes
Note: 1. Example of input on falling edge of TF/RF.
Figure 31-14. Transmit Frame Format in Continuous Mode
Note: 1. STTDLY is set to 0. In this example, SSC_THR is loaded twice. FSDEN value has no effect on the transmis-
sion. SyncData cannot be output in continuous mode.
Table 31-3. Data Frame Registers
Transmitter Receiver Field Length Comment
SSC_TFMR SSC_RFMR DATLEN Up to 32 Size of word
SSC_TFMR SSC_RFMR DATNB Up to 16 Number of words transmitted in frame
SSC_TFMR SSC_RFMR MSBF Most significant bit first
SSC_TFMR SSC_RFMR FSLEN Up to 16 Size of Synchro data register
SSC_TFMR DATDEF 0 or 1 Data default value ended
SSC_TFMR FSDEN Enable send SSC_TSHR
SSC_TCMR SSC_RCMR PERIOD Up to 512 Frame size
SSC_TCMR SSC_RCMR STTDLY Up to 255 Size of transmit start delay
Sync Data
Default
STTDLY
Sync Data
Ignored
RD
Default
Data
DATLEN
Data
Data
Data
DATLEN
Data
Data
Default
Default
Ignored
Sync Data
Sync Data
FSLEN
TF/RF
(1)
Start
Start
From SSC_TSHR From SSC_THR
From SSC_THR
From SSC_THR
From SSC_THR
To SSC_RHR To SSC_RHRTo SSC_RSHR
TD
(If FSDEN = 0)
TD
(If FSDEN = 1)
DATNB
PERIOD
FromDATDEF
FromDATDEF
From DATDEF
From DATDEF
DATLEN
Data
DATLEN
Data
Default
Start
From SSC_THR From SSC_THR
TD
Start: 1. TXEMPTY set to 1
2. Write into the SSC_THR