Datasheet

228
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
Notes: 1. Reset value of PIO_PSR depends on the product implementation.
2. PIO_ODSR is Read-only or Read-write depending on PIO_OWSR I/O lines.
3. Reset value of PIO_PDSR depends on the level of the I/O lines. Reading the I/O line levels requires the clock of the
PIO Controller to be enabled, otherwise PIO_PDSR reads the levels present on the I/O line at the time the clock was
disabled.
4. PIO_ISR is reset at 0x0. However, the first read of the register may read a different value as input changes may have
occurred.
5. Only this set of registers clears the status by writing 1 in the first register and sets the status by writing 1 in the second
register.
0x0070 Peripheral A Select Register
(5)
PIO_ASR Write-only –
0x0074 Peripheral B Select Register
(5)
PIO_BSR Write-only –
0x0078 AB Status Register
(5)
PIO_ABSR Read-only 0x00000000
0x007C
to
0x009C
Reserved
0x00A0 Output Write Enable PIO_OWER Write-only –
0x00A4 Output Write Disable PIO_OWDR Write-only –
0x00A8 Output Write Status Register PIO_OWSR Read-only 0x00000000
0x00AC Reserved
Table 27-2. Register Mapping (Continued)
Offset Register Name Access Reset