Datasheet

188

SAM7X Series [DATASHEET]

6120K–ATARM–11-Feb-14

25.9.9 PMC Clock Generator PLL Register

Access Type: Read-write

Possible limitations on PLL input frequencies and multiplier factors should be checked before using the PMC.

•DIV: Divider

• PLLCOUNT: PLL Counter

Specifies the number of slow clock cycles before the LOCK bit is set in PMC_SR after CKGR_PLLR is written.

• OUT: PLL Clock Frequency Range

To optimize clock performance, this field must be programmed as specified in “PLL Characteristics” in the Electrical Characteris-

tics section of the product datasheet.

• MUL: PLL Multiplier

0 = The PLL is deactivated.

1 up to 2047 = The PLL Clock frequency is the PLL input frequency multiplied by MUL+ 1.

• USBDIV: Divider for USB Clock

31 30 29 28 27 26 25 24

– – USBDIV – MUL

23 22 21 20 19 18 17 16

MUL

15 14 13 12 11 10 9 8

OUT PLLCOUNT

76543210

DIV

DIV Divider Selected

0 Divider output is 0

1 Divider is bypassed

2 - 255 Divider output is the selected clock divided by DIV.

USBDIV Divider for USB Clock(s)

0 0 Divider output is PLL clock output.

0 1 Divider output is PLL clock output divided by 2.

1 0 Divider output is PLL clock output divided by 4.

1 1 Reserved.