Datasheet

110
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
19.3.2 MC Flash Command Register
Register Name:MC_FCR
Access Type: Write-only
Offset: (EFC0) 0x64
Offset: (EFC1) 0x74
• FCMD: Flash Command
This field defines the Flash commands:
31 30 29 28 27 26 25 24
KEY
23 22 21 20 19 18 17 16
–––––– PAGEN
15 14 13 12 11 10 9 8
PAGEN
76543210
–––– FCMD
FCMD Operations
0000
No command.
Does not raise the Programming Error Status flag in the Flash Status Register MC_FSR.
0001
Write Page Command (WP):
Starts the programming of the page specified in the PAGEN field.
0010
Set Lock Bit Command (SLB):
Starts a set lock bit sequence of the lock region specified in the PAGEN field.
0011
Write Page and Lock Command (WPL):
The lock sequence of the lock region associated with the page specified in the field PAGEN
occurs automatically after completion of the programming sequence.
0100
Clear Lock Bit Command (CLB):
Starts a clear lock bit sequence of the lock region specified in the PAGEN field.
1000
Erase All Command (EA):
Starts the erase of the entire Flash.
If at least one page is locked, the command is cancelled.
1011
Set General-purpose NVM Bit (SGPB):
Activates the general-purpose NVM bit corresponding to the number specified in the PAGEN
field.
1101
Clear General Purpose NVM Bit (CGPB):
Deactivates the general-purpose NVM bit corresponding to the number specified in the
PAGEN field.
1111
Set Security Bit Command (SSB):
Sets security bit.
Others
Reserved.
Raises the Programming Error Status flag in the Flash Status Register MC_FSR.