Datasheet

43
SAM7X Series [SUMMARY DATASHEET]
6120IS–ATARM–14-Nov-13
6120CS Update to product functionalities including changes to “Features” on page 2, Figure 2-1 on page 5,
Section 9.5 “Debug Unit” on page 28 and to Peripheral mapping.
05-457
05-462
Updated PLL output range max value in Section 9.2 “Clock Generator” on page 26. 05-491
Updated information in Section 5.1 “Power Supplies” on page 11.
Updated ordering information in “Ordering Information” on page 41. 05-471
6120BS
Corrections to maintain consistency with full datasheet:
In “Features” on page 2, corrected Page Programming Time and Full Erase Time; corrected number of
PDC channels, removed Wake-on-LAN support.
In Figure 2-1 on page 5, corrected number of PDC channels.
In Figure 2-1 on page 5, Table 3-1 on page 6, Table 10-2 on page 32 and Table 10-3 on page 33,
changed all SPI pin names.
In Section 5.2 “Power Consumption” on page 11, changed value of static current level and value of
dynamic power consumption level on VDDCORE
In Section 6.2 “Test Pin” on page 13, removed reference to SAM-BA boot recovery.
In Section 6.6 “I/O Lines Current Drawing” on page 14, changed value of total current level.
In Section 7.4 “Peripheral DMA Controller” on page 16, corrected number of PDC channels.
In Section 8. “Memories” on page 17, corrected Page Programming Time and Full Erase Time.
In Section 8.7 “SAM-BA Boot Assistant” on page 22, updated section.
In Figure 9-1 on page 24, changed range of periph_irq and periph_clk on AIC and for Embedded
Peripherals block.
In Section 10.6 “Ethernet MAC” on page 34, updated features.
CSR 05-388
6120AS First issue - Unqualified on Intranet
Legal page updated.Qualified on Intranet
Table 12-2. Revision History
Doc. Rev Comments
Change
Request
Ref.