Datasheet

468
6120F–ATARM–03-Oct-06
AT91SAM7X512/256/128 Preliminary
• EPTYPE[2:0]: Endpoint Type
• DTGLE: Data Toggle
Read-only
0 = Identifies DATA0 packet.
1 = Identifies DATA1 packet.
Refer to Chapter 8 of the Universal Serial Bus Specification, Rev. 2.0 for more information on DATA0, DATA1 packet
definitions.
• EPEDS: Endpoint Enable Disable
Read:
0 = Endpoint disabled.
1 = Endpoint enabled.
Write:
0 = Disables endpoint.
1 = Enables endpoint.
• RXBYTECNT[10:0]: Number of Bytes Available in the FIFO
Read-only
When the host sends a data packet to the device, the USB device stores the data in the FIFO and notifies the microcontrol-
ler. The microcontroller can load the data from the FIFO by reading RXBYTECENT bytes in the UDP_ FDRx register.
Read/Write
000 Control
001 Isochronous OUT
101 Isochronous IN
010 Bulk OUT
110 Bulk IN
011 Interrupt OUT
111 Interrupt IN