Datasheet

460
6120F–ATARM–03-Oct-06
AT91SAM7X512/256/128 Preliminary
34.6.6 UDP Interrupt Mask Register
Register Name: UDP_ IMR
Access Type: Read-only
Note: 1. Bit 12 of UDP_IMR cannot be masked and is always read at 1.
• EP0INT: Mask Endpoint 0 Interrupt
• EP1INT: Mask Endpoint 1 Interrupt
• EP2INT: Mask Endpoint 2 Interrupt
• EP3INT: Mask Endpoint 3 Interrupt
• EP4INT: Mask Endpoint 4 Interrupt
• EP5INT: Mask Endpoint 5 Interrupt
0 = Corresponding Endpoint Interrupt is disabled.
1 = Corresponding Endpoint Interrupt is enabled.
• RXSUSP: Mask UDP Suspend Interrupt
0 = UDP Suspend Interrupt is disabled.
1 = UDP Suspend Interrupt is enabled.
• RXRSM: Mask UDP Resume Interrupt.
0 = UDP Resume Interrupt is disabled.
1 = UDP Resume Interrupt is enabled.
• SOFINT: Mask Start Of Frame Interrupt
0 = Start of Frame Interrupt is disabled.
1 = Start of Frame Interrupt is enabled.
• WAKEUP: USB Bus WAKEUP Interrupt
0 = USB Bus Wakeup Interrupt is disabled.
1 = USB Bus Wakeup Interrupt is enabled.
Note: When the USB block is in suspend mode, the application may power down the USB logic. In this case, any USB HOST resume
request that is made must be taken into account and, thus, the reset value of the RXRSM bit of the register UDP_ IMR is
enabled.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12
(1)
11 10 9 8
– – WAKEUP – SOFINT –
RXRSM RXSUSP
76543210
EP5INT EP4INT EP3INT EP2INT EP1INT EP0INT