Datasheet

41
6120F–ATARM–03-Oct-06
AT91SAM7X512/256/128 Preliminary
Registers R0 to R7 are unbanked registers. This means that each of them refers to the same 32-
bit physical register in all processor modes. They are general-purpose registers, with no special
uses managed by the architecture, and can be used wherever an instruction allows a general-
purpose register to be specified.
Registers R8 to R14 are banked registers. This means that each of them depends on the current
mode of the processor.
11.2.4.1 Modes and Exception Handling
All exceptions have banked registers for R14 and R13.
After an exception, R14 holds the return address for exception processing. This address is used
to return after the exception is processed, as well as to address the instruction that caused the
exception.
R13 is banked across exception modes to provide each exception handler with a private stack
pointer.
The fast interrupt mode also banks registers 8 to 12 so that interrupt processing can begin with-
out having to save these registers.
Table 11-1. ARM7TDMI ARM Modes and Registers Layout
User and
System Mode
Supervisor
Mode Abort Mode
Undefined
Mode
Interrupt
Mode
Fast Interrupt
Mode
R0 R0 R0 R0 R0 R0
R1 R1 R1 R1 R1 R1
R2 R2 R2 R2 R2 R2
R3 R3 R3 R3 R3 R3
R4 R4 R4 R4 R4 R4
R5 R5 R5 R5 R5 R5
R6 R6 R6 R6 R6 R6
R7 R7 R7 R7 R7 R7
R8 R8 R8 R8 R8
R8_FIQ
R9 R9 R9 R9 R9 R9_FIQ
R10 R10 R10 R10 R10
R10_FIQ
R11 R11 R11 R11 R11
R11_FIQ
R12 R12 R12 R12 R12
R12_FIQ
R13 R13_SVC R13_ABORT R13_UNDEF R13_IRQ R13_FIQ
R14 R14_SVC R14_ABORT R14_UNDEF R14_IRQ R14_FIQ
PC PC PC PC PC PC
CPSR CPSR CPSR CPSR CPSR CPSR
SPSR_SVC SPSR_ABORT SPSR_UNDEF SPSR_IRQ SPSR_FIQ
Mode-specific banked registers