Datasheet

73
4235K–8051–05/08
AT89C51RD2/ED2
17.1 Registers
The PCA interrupt vector is located at address 0033H, the SPI interrupt vector is located at
address 004BH and Keyboard interrupt vector is located at address 003BH. All other vectors
addresses are the same as standard C52 devices.
Table 17-1. Priority Level Bit Values
A low-priority interrupt can be interrupted by a high priority interrupt, but not by another low-prior-
ity interrupt. A high-priority interrupt can’t be interrupted by any other interrupt source.
If two interrupt requests of different priority levels are received simultaneously, the request of
higher priority level is serviced. If interrupt requests of the same priority level are received simul-
taneously, an internal polling sequence determines which request is serviced. Thus within each
priority level there is a second priority structure determined by the polling sequence.
17.2 Interrupt Sources and Vector Addresses
Table 17-2. Interrupt Sources and Vector Addresses
IPH.x IPL.x Interrupt Level Priority
0 0 0 (Lowest)
0 1 1
1 0 2
1 1 3 (Highest)
Number Polling Priority Interrupt Source
Interrupt
Request
Vector
Address
0 0 Reset 0000h
1 1 INT0 IE0 0003h
2 2 Timer 0 TF0 000Bh
3 3 INT1 IE1 0013h
4 4 Timer 1 IF1 001Bh
5 6 UART RI+TI 0023h
6 7 Timer 2 TF2+EXF2 002Bh
7 5 PCA CF + CCFn (n = 0 - 4) 0033h
8 8 Keyboard KBDIT 003Bh
9 9 - - 0043h
10 10 SPI SPIIT 004Bh