Datasheet

883
32072H–AVR32–10/2012
AT32UC3A3
1 : Write 1 to sample data at the rising edge of SCLK.
•
REO : Rising Edge output. This bit is used when not fixed hold time by the side of the Memory Stick in parallel
communication. This setting cannot be changed during protocol execution.
0 : Write 0 to synchronize outputs with the falling edge of SCLK.
1 : Write 1 to synchronize outputs with the rising edge of SCLK.
•
BSY : Busy Count. This is the maximum BSY wait time until the RDY signal is output from the Memory Stick.
0 : Write a value to configure time out = BSY * 4 SCLK.
1 : Write 0 to disable time out detection.