Datasheet

742
32072H–AVR32–10/2012
AT32UC3A3
27.8.3.20 Pipe n Error Register
Register Name: UPERRn, n in [0..7]
Access Type: Read/Write
Offset: 0x0680 + (n * 0x04)
Reset Value: 0x00000000
• COUNTER: Error Counter
This field is incremented each time an error occurs (CRC16, TIMEOUT, PID, DATAPID or DATATGL).
This field is cleared when receiving a good usb packet without any error.
When this field reaches 3 (i.e., 3 consecutive errors), this pipe is automatically frozen (UPCONn.PFREEZE is set).
Writing 0b00 to this field will clear the counter.
• CRC16: CRC16 Error
This bit is set when a CRC16 error has been detected.
Writing a zero to this bit will clear the bit.
Writing a one to this bit has no effect.
• TIMEOUT: Time-Out Error
This bit is set when a Time-Out error has been detected.
Writing a zero to this bit will clear the bit.
Writing a one to this bit has no effect.
•PID: PID Error
This bit is set when a PID error has been detected.
Writing a zero to this bit will clear the bit.
Writing a one to this bit has no effect.
• DATAPID: Data PID Error
This bit is set when a Data PID error has been detected.
Writing a zero to this bit will clear the bit.
Writing a one to this bit has no effect.
• DATATGL: Data Toggle Error
This bit is set when a Data Toggle error has been detected.
Writing a zero to this bit will clear the bit.
Writing a one to this bit has no effect.
31 30 29 28 27 26 25 24
--------
23 22 21 20 19 18 17 16
--------
15 14 13 12 11 10 9 8
--------
76543210
- COUNTER CRC16 TIMEOUT PID DATAPID DATATGL