Datasheet

601
32072H–AVR32–10/2012
AT32UC3A3
25.7.5 Interrupt Mask Register
Name: IMR
Access Type: Read-only
Offset: 0x10
Reset Value: 0x00000000
0: The corresponding interrupt is disabled.
1: The corresponding interrupt is enabled.
A bit in this register is cleared when the corresponding bit in IDR is written to one.
A bit in this register is set when the corresponding bit in IER is written to one.
• LINSNRE: LIN Slave Not Responding Error
• LINCE: LIN Checksum Error
• LINIPE: LIN Identifier Parity Error
• LINISFE: LIN Inconsistent Sync Field Error
• LINBE: LIN Bit Error
• MANEA/MANE: Manchester Error
• CTSIC: Clear to Send Input Change Flag
• DCDIC: Data Carrier Detect Input Change Flag
• DSRIC: Data Set Ready Input Change Flag
• RIIC: Ring Indicator Input Change Flag
• LINTC: LIN Transfer Completed
• LINIDR: LIN Identifier
• NACK: Non Acknowledge
• RXBUFF: Reception Buffer Full
• ITER/UNRE: Max number of Repetitions Reached or SPI Underrun Error
• TXEMPTY: Transmitter Empty
• TIMEOUT: Receiver Time-out
• PARE: Parity Error
• FRAME: Framing Error
• OVRE: Overrun Error
• RXBRK: Break Received/End of Break
• TXRDY: Transmitter Ready
• RXRDY: Receiver Ready
For backward compatibility the MANE bit has been duplicated to the MANEA bit position. Reading either one or the other
has the same effect. The corresponding bit in CSR and the corresponding interrupt request are named MANERR.
31 30 29 28 27 26 25 24
– – LINSNRE LINCE LINIPE LINISFE LINBE MANEA
23 22 21 20 19 18 17 16
– – – MANE CTSIC DCDIC DSRIC RIIC
15 14 13 12 11 10 9 8
LINTC LINIR NACK RXBUFF – ITER/UNRE TXEMPTY TIMEOUT
76543210
PARE FRAME OVRE – – RXBRK TXRDY RXRDY