Datasheet

46
AT32UC3A
12.6 Clock Characteristics
These parameters are given in the following conditions:
Stop
Typ : Ta = 25 °C.
CPU is in stop mode
GPIOs on internal pull-up.
All peripheral clocks de-activated.
DM and DP pins connected to ground.
XIN0,Xin1 and XIN2 are stopped
on Amp0 47 uA
on Amp1 40 uA
Deepstop
Typ : Ta = 25 °C.CPU is in deepstop mode
GPIOs on internal pull-up.
All peripheral clocks de-activated.
DM and DP pins connected to ground.
XIN0,Xin1 and XIN2 are stopped
on Amp0 36 uA
on Amp1 28 uA
Static
Typ : Ta = 25 °C. CPU is in static mode
GPIOs on internal pull-up.
All peripheral clocks de-activated.
DM and DP pins connected to ground.
XIN0,Xin1 and XIN2 are stopped
on Amp0 25 uA
on Amp1 14 uA
1. Core frequency is generated from XIN0 using the PLL so that 140 MHz < fpll0 < 160 MHz and 10 MHz < fxin0
< 12MHz
Table 12-9. Power Consumption for Different Modes
Mode Conditions Typ. Unit
Table 12-10. Power Consumption by Peripheral in Active Mode
Peripheral Typ. Unit
GPIO 37
µA/MHz
SMC 10
SDRAMC 4
ADC 18
EBI 31
INTC 25
TWI 14
MACB 45
PDCA 30
PWM 36
RTC 7
SPI 13
SSC 13
TC 10
USART 35
USB 45
32058KS–AVR32–01/12