Datasheet

Table Of Contents
AT30TSE004A [DATASHEET]
Atmel-8868C-DTS-AT30TSE004A-Datasheet_122013
24
6.3 Temperature Sensor Write Operations
Writing to the Temperature Register of the AT30TSE004A is accomplished through a modified Write operation
for two data bytes. To maintain 2-wire compatibility, the 16-bit registers are accessed through a Pointer Register
requiring the TS Write sequence to include a Pointer Register byte following the device address byte to write the
two data bytes. Figure 6-2 illustrates the entire Write transaction.
Figure 6-2. Temperature Sensor Register Write Operation
SCL
SDA
Start
by
Master
ACK
from
Slave
ACK
from
Slave
Device Address Byte Pointer Register Byte
MSB MSB
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9
0 0 1 1 A2 A1 A0 0 0 0
Start
by
Master
ACK
from
Slave
ACK
from
Slave
Most Significant Data Byte
Least Significant Data Byte
Stop
by
Master
MSB MSB
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9
D15 D14 D13 D12 D11 D10 D9 D8 0 D7 D6 D5 D4 D3 D2 D1 D0 0
P7 P6 P5 P4 P3 P2 P1 P0