User manual

LIN Serial Analyzer User’s Guide Rev2.0

3.8.1.2 DEVELOPING AND STORING MESSAGE CONTENT

To manually add message content to the “Master Frames” field:

1. Click the Add button. A second window displays for creation of the new mes-

sage.

2. Type the message in the text box.

3. Click OK.

To load a pre-existing message to the “Master Frames” field:

1. From the pull-down menus, select File>Open

. The “Open” dialog box appears.

2. In the dialog box’s list box, select the desired *.ini file.

3. Click Open.

To delete some message content:

1. In the “Master Frames” field, select the content to be deleted by doing one of the

following:

•To select adjacent rows of content – Click on the first row, scroll down to the

last row and hold down <Shift> while clicking.

•To select non-adjacent rows of content – Hold down <Ctrl> while clicking each

row.

2. Click Delete.

To edit some message content:

1. In the “Master Frames” field, select the content line to be edited

1. Click Edit. A second window displays to edit hte message.

2. Make and corrections or additions to the message in the text box.

3. Click OK

To send a message:

1. In the “Master Frames” field, select the content to be sent by doing one of the

following:

•To select adjacent rows of content – Click on the first row, scroll down to the

last row and hold down <Shift> while clicking.

•To select non-adjacent rows of content – Hold down <Ctrl> while clicking each

row.

2. Click Send.

The highlighted message content is sent, working top-to-bottom through the

“Master Frames” field.

The message is sent once. (For information on continually sending the

highlighted message content, see Section 3.8.3 “Checksum Group”.)

WARNING

Importing a file into the “Master Frames” field overwrites any content that previously

had been in that field.