User manual

LIN Serial Analyzer User’s Guide Rev2.0

3.5 SETUP FUNCTIONS

The Tools pull-down menu has the following commands.

3.5.1 Setup COM port

The “Setup COM port” function selects the USB communication port to use.

The menu also sets the baud rate to apply to master transactions.

The “Timeout in mS” text box displays the current time-out value for a message frame

and may be modified by the user. To enable the time-out value to vary with the baud

rate, enter a value of 0.

FIGURE 3-4: “Setup COM port” WINDOW

To display the dialog box, select Setup>COM port

Note: The “COM port” drop-down list box displays only available, plugged-in USB

ports. If the correct serial port is not displayed in the menu, verify that the

USB hardware is correctly installed.