User manual

LIN Serial Analyzer User’s Guide Rev2.0
DS51675B-page 6 © 2008 Microchip Technology Inc.
FIGURE 1-1: LIN SERIAL ANALYSER DEVELOPMENT TOOL
1.5 LIN SERIAL ANALYSER HARDWARE
The LIN Serial Analyser connects to a Microsoft
®
Windows
®
operating system
compatible computer using a USB port. It interfaces to the target network using a
three-position, screw-type terminal block.
FIGURE 1-2: LIN SERIAL ANALYSER
1.5.1 Status LEDs
The Status LEDs indicate the status of the LIN Serial Analyser. An illuminated LED
means:
• USB (green) – Power has been applied to the LIN Serial Analyser by the USB
port.
• Busy (yellow) – The LIN Serial Analyser is communicating with the LIN network.
• LIN (blue) – The LIN Serial Analyser is connected to the target bus.
Board Under Test
LIN Tool
PC
Optional
Power
Supply
Status LEDs
USB Port