User manual

MCP2210 EVALUATION KIT

USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

MCP2210 Evaluation Kit. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the MCP2210 Evaluation Kit as a development

tool. The manual layout is as follows:

• Chapter 1. “Product Overview” – Important information about the MCP2210

Evaluation Kit

• Chapter 2. “Installation and Operation” – Covers the initial set-up of this board

and Graphical User Interface (GUI)

• Appendix A. “Schematic and Layouts” – Shows the schematic and board

layouts for the MCP2210 Evaluation Kit User’s Guide

• Appendix B. “Bill of Materials” – Lists the parts used to populate the MCP2210

Evaluation Kit

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB

IDE online help.

Select the Help menu, and then Topics to open a list of available online help files.