User manual

MCP2210 Evaluation Kit User’s Guide

the first line, first column on the left). When, a particular cell in the data grid control is

highlighted, the corresponding EEPROM address is displayed in the bottom left corner

of the application window.

FIGURE 2-4: EEPROM 25LC02 SECTION

The EEPROM section also shows three buttons:

• Read EEPROM – Press this button to read the entire EEPROM memory. The

content will show in the data-grid control.

• Write EEPROM – The user can modify the data and add other hex-represented

byte values in the cells. When all the modifications are done, press this button to

write the modified data-grid content on the EEPROM.

• Clear Mem – To verify the EEPROM content, press this button. This action clears

only the data-grid control, not the EEPROM contents. Later, when the Read

EEPROM button is pressed again, the actual EEPROM content will display in the

data-grid control.

2.3.7 TC77 Temp Sensor Section

The temperature sensor displays the temperature of the sensor device present on the

motherboard in either Fahrenheit or Celsius scales.

FIGURE 2-5: TC77 TEMPERATURE SENSOR SECTION

Data-grid

controls

Control

buttons

Temperature

unit selection

TC77

temperature