User manual

PIC18F87J72 EVALUATION BOARD
USER’S GUIDE
© 2011 Microchip Technology Inc. DS51990A-page 35
Chapter 6. PIC18F87J72 Evaluation Board GUI
6.1 INTRODUCTION
This chapter describes the Graphical User Interface used for the PIC18F87J72
Evaluation Board. Figure 6-1 indicates the various waveforms and the parameters that
can be displayed on the GUI. The signals can be viewed in their real-time state in Time
domain as well as in Frequency domain. UART is used for communication between the
GUI and the microcontroller. The baud rate used for communication is 38400. To use
the GUI, the following run-time engines must be installed:
• Visa441runtime
• LVRTE86std
FIGURE 6-1: PIC18F87J72 Evaluation Board Graphical User Interface.
Length