User manual

Bill of Materials (BOM)
© 2011 Microchip Technology Inc. DS51994A-page 27
12 R5,R7,R11
R12,R83,R85
R86,R88,R95
R97,R98 R100
RES 1.0K OHM .1% 1/4W 0805 SMD Susumu Co., LTD. RGH2012-2E-P-102-B
2 R59,R60 RES 10.0 OHM 1/8W 1% 0805 SMD Rohm Semi. MCR10EZHF10R0
4 SW1,SW2
SW3,SW4
SWITCH TACT 6MM 230GF H=4.3MM Omron Electronic
Components -
ECB Division
B3S-1002P
1 TP1 Wire Test Point 0.3" Length Components Corp. PJ-202-30
1 U1 IC REG LDO 800MA 5.0V SOT-223 National Semi. LM1117MP-5.0/NOPB
1 U3 IC REG LDO 800MA 3.3V SOT-223 National Semi. LM1117MP-3.3/NOPB
1 U6 IC DRVR/RCVR MLTCH RS232 20TSSOP Texas Instruments SN75C3223PWR
1 U7 "DO NOT INSTALL" - -
1 U9 IC ENERGY METER 28SSOP Microchip MCP3903
1 X2 CRYSTAL 3.579545MHZ 18PFFUND
SMD
Abracon Corp. ABLS-3.579545MHZ-B2-T
TABLE B-1: BILL OF MATERIALS (BOM) (CONTINUED)
Qty Reference Description Manufacturer Part Number
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM
used in manufacturing uses all RoHS-compliant components.