Motor Control and Drive Motor Control and Drive Design Solutions www.microchip.
Microchip Motor Control and Drive Solutions Silicon Solution Cost Competitive Superior Architecture Large Compatible Family Algorithms Technical Support ACIM/BLDC/PMSM Brush DC/Stepper Sensor/Sensorless Control Field-Oriented Control Power Factor Correction Web Design Center Webinars Regional Training Center Classes Motor Control Experts Reference Designs and GUI Tools Application Note Library with Code Low-cost Development Tools Software GUIs for Motor Tuning Real-Time Motor Parameter Updates Need De
Brushed DC Motors Brushed DC Motor Control Brushed DC Motor Training Brushed DC motors are easy to control because speed and torque are proportional to the applied voltage/current. The rotor is heavy due to windings on the armature, more inertia makes it more difficult to start/stop. Heat is generated in windings on the rotor and is more difficult to remove. H Bridge Gate Drivers Class Title Duration 09/18/2008 14 min.
Stepper Motors Stepper Motor Control Stepper Motor Development Tools Do you need exact position control with great holding torque? If so, then a stepper motor is the best solution. While nearly every MCU or DSC from Microchip can drive a stepper motor, some are better suited for this than others.
Stepper Motors Recommended Products for Stepper Motor Control Device Motor Type Input Voltage Range (V) Output Current (mA) Control Scheme Temp. Operating Range (°C) Features MTS62C19A One Bipolar Stepper Motor or Two DC Motors 10.0 to 40.
Brushless DC Motor Control BLDC Motor Control BLDC Fan Motor Control Looking for high reliability, high efficiency, and high power-to-size ratio motor? The obvious solution is a Brushless DC (BLDC) motor. It shares many of the same torque and speed characteristics with the brushed DC motor, but without the brushes.
Brushless DC Motor Control BLDC Development Tools dsPICDEM MCHV-2 Development System (DM330023-2) F1 BLDC Motor Add-On (DM164130-2) The BLDC Motor Add-On is a simple development accessory that plugs directly into the F1 Evaluation Platform or F1 Evaluation Platform and incorporates all the components necessary to implement Brushless DC motor control.
Brushless DC Motor Control Recommended Products for Brushless Fan Control (Continued) Input Output Control Voltage Current Scheme Range (V) (mA) Motor Type Device 3-Phase Brushless DC Motor MTD6505 MTD6501C MTD6501D MTD6501G 3-Phase Brushless DC Motor 3-Phase Brushless DC Motor 3-Phase Brushless DC Motor 2.0 to 5.5 750 2.0 to 14.0 800 2.0 to 14.0 500 2.0 to 14.0 800 Temp.
Permanent Magnet Synchronous Motors PMSM Motor Control PMSM Development Tools Permanent Magnet Synchronous Motors (PMSM) are brushless and have very high reliability and high efficiency. Due to permanent magnet rotor, they also have higher torque with smaller frame size and no rotor current, of all which are advantages over AC induction motors. With a high power-to-size ratio, PMSMs can help you make your design smaller without the loss of torque.
Permanent Magnet Synchronous Motors PMP RTCC CAN USB 2.
AC Induction Motors AC Induction Motor Control AC Induction Application Notes The AC Induction Motor (ACIM) is the workhorse of the world. It is the most common motor type, used in everything from consumer products to heavy industry. Its simple design with no brushes makes it highly reliable and also allows it to be manufactured at a low cost. But, it is less efficient than other motors like PMSM, which is partially related to the heat generation in the rotor windings.
AC Induction Motors PMP RTCC CAN USB 2.
Application Notes for Motor Control Motor Control Application Notes by Motor Type Motor Type Stepper Motor Brushed DC Motor BLDC and PMSM AC Induction Motor Other App.
World Class Development Tools MPLAB X IDE Universal and Integrated Tool Set MPLAB X IDE is a single, universal graphical user interface for Microchip and third party software and hardware development tools. It is the industry’s only IDE to support an entire portfolio of 8-bit, 16-bit and 32-bit PIC MCUs, dsPIC DSCs and memory devices. MPLAB X supports Microchip’s compilers, emulators, debuggers and starter kits, as well as many third-party tools.
Motor Control Tuning GUIs These software plug-in tools included with MPLAB X IDE assist with the development of motor control applications: ■ Data Monitor and Control Interface (DMCI): Provides a customizable GUI to input and adjust software motor parameters using sliders and switches. Four customizable output plots can be used to show a graphical history of control variables so that the motor dynamic response can by analyzed.
Support Training Microchip is committed to supporting its customers in developing products faster and more efficiently. We maintain a worldwide network of field applications engineers and technical support ready to provide product and system assistance. In addition, the following service areas are available at www.microchip.com: ■ Support link provides a way to get questions answered fast: http://support.microchip.com ■ Sample link offers evaluation samples of any Microchip device: http://sample.
