User manual

EEP and Emulation Header User’s Guide
DS50002243A-page 38  2014 Microchip Technology Inc.
5.3 6-PIN SIL CONNECTOR
Emulation headers with 6-pin SIL (Single In-Line) connectors are compatible with the
PICkit 3.
The 6-pin modular cable attached to the Standard Driver Board may be connected to
the 6 header pins through the Modular-to-SIL Adapter.
The 8-pin socket of the High Speed Driver Board or optional Isolation Unit may be
directly connected to the 6 header pins. Be sure to line up pin 1 on the board with pin
1 on the header.
FIGURE 5-1: 6-PIN SIL CONNECTION TO AN EMULATOR
1
J1
DAT
CLK
J3 J2
TOP
Header
Connector
MPLAB REAL ICE in-circuit emulator
High-Speed Receiver Board or
optional Isolation Unit
TOP
1