Datasheet

Required Debug Headers
 2006-2012 Microchip Technology Inc. DS51292U-page 19
AC162060
Header Identification
The header AC number is used for ordering the header. However, this number is not
on the debug header, as the board is often used for multiple headers by inserting
different ICE/ICD devices. To identify this debug header, use the following information.
Header Setup and Operation
For the PIC16F785 20-pin header, you will need to connect the jumper J2 to enable the
shunt regulator.
Header Limitations
See the “Limitations” section in your debug tool online Help file for details.
Header ICE/ICD Device Board Assembly Number
AC162060 PIC16F785-ICD 02-01820
Device Device Type Jumper J2 Function
PIC16F785 F 1-2 Disable shunt regulator
PIC16HV785 HV 2-3 Enable shunt regulator