Datasheet

Messages
 2013 Microchip Technology Inc. DS52085A-page 95
10.2.7 Miscellaneous Errors
For the errors below, read any instructions under your error message.
could not open file
There was a problem reading file
Failed to set firmware suite.
Database intitialization failure.
Connection failed (timed out waiting to REAL ICE to respond)
MPLAB has lost communication with REAL ICE.
Unable to connect to REAL ICE (MPLABComm connect failure)
REAL ICE is busy. Please wait for the current operation to finish.
If you receive this error when attempting to deselect the emulator as a debugger
or programmer:
1. Wait - give the emulator time to finish any application tasks. Then try to
deselect the emulator again.
2. Select Halt to stop any running applications. Then try to deselect the emulator
again.
3. Unplug the emulator from the PC. Then try to deselect the emulator again.
4. Shut down MPLAB IDE.
REAL ICE failed to request DMA reads.
Unable to intialize REAL ICE database.
An Error occurred while running
Address: %x Expected Value: %x Received Value: %x
Target Device ID (0x%x) does not match expected Device ID (0x%x).
Unable to properly create REAL ICE database.
10.2.8 Internal Errors
See Section 10.3.7 “Internal Error Actions”.
Initialization failed: Unable to create ControlPointMediator
Initialization failed: Unable to create com object
Initialization failed: Unable to retrieve device information for device %s
Initialization failed: Family class is unrecognized
Initialization failed: Failed while retrieving device database (.pic) information
Initialization failed: Failed while retrieving tool database (.rice) information
Initialization failed: Unable to load debug executive
Initialization failed: Unable to acquire emulation memory object
Initialization failed: Unable to acquire ToolExecMediator