Datasheet

MPLAB
®
REAL ICE
™
IN-CIRCUIT
EMULATOR USER’S GUIDE FOR
MPLAB X IDE
 2013 Microchip Technology Inc. DS52085A-page 67
Chapter 7. Specific Debug Functions: 32-Bit Devices
7.1 INTRODUCTION
The following debug functions are specific to 32-bit devices:
• Data Capture and Runtime Watches
• PIC32 Instruction Trace
• Instrumented Trace
• PC Profiling
• Application In/Out
• Additional Debug Features
7.2 DATA CAPTURE AND RUNTIME WATCHES
Not all 32-bit devices support data capture and/or runtime watches. A list of supported
features by device is available in online help.
For PIC32 devices, breakpoints use different resources than data captures and runtime
watches. However data captures and runtime watches use the same resources.
Therefore, setting a data capture or runtime watch uses the resource for the selected
symbol.
• Data Capture and DMCI
• Runtime Watches and DMCI
• Runtime Watches and the Watch Window
Note: For PIC32 devices, the JTAG port may need to be disabled to prevent
conflicts when using trace and other ICE features where pin conflicts can
result.
Note: The Performance Pak is not required for debugging at maximum speeds as
the capture clock speed is independent of the target system clock.