Datasheet

Emulator Function Summary
 2013 Microchip Technology Inc. DS52085A-page 103
32-Bit Devices
Options available on this page depend on the trace/profiling features of the project
device. For more on trace and profiling, see
Chapter 7. “Specific Debug Functions:
32-Bit Devices”
.
11.3.2 External Triggers
Select external triggers for Triggers 0 through 7. For more on triggers, see
Section 5.5 “External Triggers (Logic Probes)”.
Timer Interval Units Select a sampling interval unit:
• microseconds
• milliseconds
• seconds
• instruction cycles
TABLE 11-2: TRACE/PROFILING OPTION CATEGORY
Data Collection Selection Enable/Disable data collection.
• Off - Do not use trace of PC sampling
• Instruction Trace/Profiling - see
Section 7.3 “PIC32 Instruction Trace” and
Section 7.5 “PC Profiling”.
• User Instrumented Trace - see
Section 7.4 “Instrumented Trace”.
Data File Path and Name Enter or change the path and/or name of the file
used to store data.
Data File Maximum Size (bytes) Set the maximum size of the data file.
Data Buffer Maximum Size (bytes) Set the size of the data buffer, up to 54600 bytes (on
board the emulator unit.)
User Instrumented Trace Items
Disable Trace Macros Check to temporarily disable trace macros or
uncheck to enable trace macros.
To disable trace, remove all macros and select “Off”
under “Data Collection Selection”.
Communications Medium Select the trace medium, if available (device depen-
dent): Native.
TABLE 11-1: TRACE/PROFILING OPTION CATEGORY (CONTINUED)