Datasheet

MPLAB
®
REAL ICE
™
IN-CIRCUIT
EMULATOR USER’S GUIDE FOR
MPLAB X IDE
 2013 Microchip Technology Inc. DS52085A-page 101
Chapter 11. Emulator Function Summary
11.1 INTRODUCTION
A summary of the MPLAB REAL ICE in-circuit emulator functions is listed here.
• Emulator Selection and Switching
• Emulator Options Selection
• Emulator Windows & Dialogs
11.2 EMULATOR SELECTION AND SWITCHING
Use the Project Properties dialog to select or switch emulators for a project. To switch
you must have more than one MPLAB REAL ICE in-circuit emulator connected to your
computer. MPLAB X IDE will differentiate between the two by displaying two different
serial numbers.
To select or change the emulator used for a project:
1. Open the Project Properties dialog by doing one of the following:
a) Click on the project name in the Project window and select File>Project
Properties.
b) Right click on the project name in the Project window and select “Properties”.
2. Under “Categories”, click on “[[default]]”
3. Under “Hardware Tools”, find “REAL ICE” and click on a serial number (SN) to
select an emulator for use in the project.
11.3 EMULATOR OPTIONS SELECTION
Set up emulator options on the emulator property pages of the Project Properties
dialog.
1. Open the Project Properties dialog by doing one of the following:
a) Click on the project name in the Project window and select File>Project
Properties.
b) Right click on the project name in the Project window and select “Properties”.
2. Under “Categories”, click on “REAL ICE”
3. Select property pages from “Options categories”. Click on an option to see its
description in the text box below. Click to the right of an option to change it.
Available option categories are:
• Trace and Profiling
• External Triggers
•Clock
• Freeze Peripherals
• Debug Options
• Program Options
•Firmware
• Memories to Program