User manual

MPLAB
®
REAL ICE
™
In-Circuit Emulator User’s Guide
DS51616B-page 90 © 2008 Microchip Technology Inc.
RIErr0012: Download debug exec failed
If you receive this error while attempting to program from the Debugger menu:
1. Deselect the emulator as the debug tool.
2. Close you project and then close MPLAB IDE.
3. Restart MPLAB IDE and re-open your project.
4. Reselect the emulator as your debug tool and attempt to program your target
device again.
If this does not work, see Section 10.3.4 “Corrupted Installation Actions”.
RIErr0013: NMMR register write failed.
RIErr0014: File register write failed.
See Section 10.3.2 “Emulator-to-Target Communication Error Actions”.
RIErr0015: Data transfer was unsuccessful. %d byte(s) expected, %d byte(s)
transferred.
See Section 10.3.3 “Emulator-to-PC Communication Error Actions”.
RIErr0016: Cannot transmit. REAL ICE not found.
The emulator is not connected to the PC.
RIErr0017: File register read failed.
RIErr0018: NMMR register read failed.
RIErr0019: Failed while reading emulation registers.
RIErr0020: Failed while writing emulation registers.
See Section 10.3.2 “Emulator-to-Target Communication Error Actions”.
RIErr0021: Command not echoed properly. Sent %x, received %x.
RIErr0022: Failed to get REAL ICE version information.
RIErr0023: Download FPGA failed.
RIErr0024: Download RS failed.
RIErr0025: Download AP failed.
See Section 10.3.3 “Emulator-to-PC Communication Error Actions”.
RIErr0026: Download program exec failed.
If you receive this error while attempting to program from the Debugger menu:
1. Deselect the emulator as the debug tool.
2. Close your project and then close MPLAB IDE.
3. Restart MPLAB IDE and re-open your project.
4. Reselect the emulator as your debug tool and attempt to program your target
device again.
If this does not work, see Section 10.3.4 “Corrupted Installation Actions”.
RIErr0027: Bulk transfer failed due to invalid checksum
See Section 10.3.3 “Emulator-to-PC Communication Error Actions”.
Also, ensure that the cables used are of the correct length.
RIErr0028: Download device database failed
If you receive this error:
1. Try downloading again. It may be a one-time error.
2. Try manually downloading. Select Debugger>Settings
, Configuration tab, and
click Manual Download. Select the highest-number .jam file and click Open.
RIErr0029: Communication failure. Unexpected command echo response %x
received from REAL ICE.
See Section 10.3.3 “Emulator-to-PC Communication Error Actions”.