User manual

MPLAB

REAL ICE

™

In-Circuit Emulator User’s Guide

FIGURE 4-7: WINDOWS EXPLORER – PROJECT FILES

4.7 VIEWING DEBUG OPTIONS

Before you begin debugging your code, review the default settings of several items. In

your own projects, you may need to set these items differently.

4.7.1 Configuration Bits

In this tutorial, the relevant device Configuration bits are set in the counter.c code

using the _CONFIG1 and _CONFIG2 directives. For information on the function of these

PIC24FJ128GA010 configuration register bits, see the PIC24FJ128GA Family Data

Sheet (DS39747).

Configuration bits also may be set by selecting Configure>Configuration Bits

and

unchecking “Configuration bits set in code”. Do not change any values for this tutorial.

FIGURE 4-8: CONFIGURATION BITS WINDOW