User manual

MPLAB

REAL ICE

™

In-Circuit Emulator User’s Guide

2.5.4 PIC32 Instruction Trace Connections

PIC32 Instruction Trace is only available for PIC32MX MCU devices, and it is the only

type of trace available for these devices. Also, only some PIC32MX MCU devices have

the trace feature. Consult your device data sheet for details.

To use this trace, you will need the following hardware:

• PIC32MX Plug-In Module (PIM) containing a device that supports trace and a

trace port

• PIC32MX Trace Interface Kit (AC244006) containing a 12-inch trace cable and a

trace adapter board

To use the PIC32 Instruction Trace feature, see Section 8.3 “PIC32 Instruction

Trace”.

FIGURE 2-12: PIC32 TRACE CONNECTION

PIM

Interface

Connector

Application

PC Board

Device

TRD3:0

Trace

Connector

ACTIVE

STATUS

RESETFUNCTION

Emulator Pod

TRCLK