User manual

Hardware Specification
© 2008 Microchip Technology Inc. DS51616B-page 117
FIGURE 12-2: 6-PIN STANDARD PINOUT
12.6.2 Modular Cable and Connector
For standard communications, a modular cable connects the emulator and the target
application. The specifications for this cable and its connectors are listed below.
12.6.2.1 MODULAR CONNECTOR SPECIFICATION
• Manufacturer, Part Number – AMP Incorporated, 555165-1
• Distributor, Part Number – Digikey, A9031ND
The following table shows how the modular connector pins on an application
correspond to the microcontroller pins. This configuration provides full ICD
functionality.
FIGURE 12-3: MODULAR CONNECTOR PINOUT OF TARGET BOARD
12.6.2.2 MODULAR PLUG SPECIFICATION
• Manufacturer, Part Number – AMP Incorporated, 5-554710-3
• Distributor, Part Number – Digikey, A9117ND
1
2
3
4
5
6
Pin Name Function
1VPP Power
2V
DD_TGT Power on target
3 GND Ground
4 ICSPDAT Standard Com Data
5 ICSPCLK Standard Com Clock
6 AUX Auxiliary
Bottom of
Target Board
Standard Socket
Modular
Connector Pin
Microcontroller
Pin
6 Not Used
5 RB6
4RB7
3 Ground
2V
DD Target
1 VPP
1
6
Bottom view of Modular Connector
Pinout on Target Board
16
Front view of Modular Connector
on Target Board