User manual

ZENA™ WIRELESS ADAPTER

USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

ZENA™ Wireless Adapter. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Warranty Registration

• Recommended Reading

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the ZENA Wireless Adapter. The manual layout

is as follows:

• Chapter 1. “Overview” – This chapter provides a brief overview of the ZENA

Wireless Adapter, including kit contents and features.

• Chapter 2. “Getting Started” – This chapter describes how to start using your

ZENA Wireless Adapter.

• Appendix A. “ZENA™ Wireless Adapter Construction Details” – This

appendix contains the schematics, PCB layout and Bill of Materials (BOM).

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB

IDE on-line help.

Select the Help menu, and then Topics to open a list of available on-line help files.