User manual

ZENA™ Wireless Adapter User’s Guide

2.2.2.1 INSTALLING THE USB DRIVER FOR WINDOWS

2000/XP/VISTA/7 OSs

To Install the USB Driver for windows, perform the following tasks:

1. Plug in the ZENA Wireless Adapter into a USB port. Windows will prompt for a

hardware installation as shown in Figure 2-1.

FIGURE 2-1: FOUND NEW HARDWARE WIZARD WINDOW

2. Select I

nstall the software automatically (Recommended) and then click Next.

Windows will search and install the driver automatically as shown in Figure 2-2.

FIGURE 2-2: INSTALLING THE DRIVER

Note: In the following screenshots, we have used ZENA Wireless Adapter –

2.4 GHz MRF24J40. The same set of sequence is applicable for ZENA

Wireless Adapter – 868 MHz MRF89XA and ZENA Wireless Adapter –

915 MHz MRF89XA.