Datasheet

 2006-2014 Microchip Technology Inc. DS70000178D-page 235
dsPIC30F1010/202X
TABLE 21-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.3V and 5.0V (±10%)
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (I
IDLE): Core Off Clock On Base Current
(2)
DC40a 8 9 mA +25°C
3.3V
FRC, 3.2 MIPS, PLL disabled
DC40b 8 9 mA +85°C
DC40c 8 10 mA +125°C
DC40d 12 15 mA +25°C
5VDC40e 13 15 mA +85°C
DC40f 13 16 mA +125°C
DC42a 10 12 mA +25°C
3.3V
FRC, 4.9 MIPS, PLL disabled
DC42b 11 13 mA +85°C
DC42c 11 13 mA +125°C
DC42d 17 20 mA +25°C
5VDC42e 17 21 mA +85°C
DC42f 18 21 mA +125°C
DC43a 15 18 mA +25°C
3.3V
FRC, 7.3 MIPS, PLL disabled
DC43b 15 18 mA +85°C
DC43c 15 18 mA +125°C
DC43d 24 29 mA +25°C
5VDC43e 24 29 mA +85°C
DC43f 25 30 mA +125°C
DC44a 44 53 mA +25°C
3.3V
FRC, 13 MIPS, PLL enabled
DC44b 45 54 mA +85°C
DC44c 46 55 mA +125°C
DC44d 72 87 mA +25°C
5VDC44e 73 88 mA +85°C
DC44f 74 89 mA +125°C
DC46a 66 79 mA +25°C
3.3V
FRC 20 MIPS, PLL enabled
DC46b 67 80 mA +85°C
DC46d 108 129 mA +25°C
5VDC46e 109 131 mA +85°C
DC45f 110 132 mA +125°C
DC47d 152 182 mA +25°C
5V FRC, 30 MIPS, PLL enabled
DC47e 153 183 mA +85°C
Note 1: Data in “Typical” column is at 5V, +25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
IDLE current is measured with core off, clock on and all modules turned off. All I/Os are configured
as inputs and pulled high. WDT, etc. are all switched off.