User manual

MRF24J40MA/MB PICtail™/PICtail
PLUS DAUGHTER BOARD
USER’S GUIDE
 2009 Microchip Technology Inc. DS51867A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MRF24J40MA/MB PICtail™/PICtail Plus Daughter Board. Items discussed in this
chapter include:
• Document Layout
• Conventions Used in this Guide
• Warranty Registration
• Recommended Reading
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MRF24J40MA/MB PICtail™/PICtail Plus
Daughter Board. The manual layout is as follows:
• Chapter 1. “Overview” This chapter provides an overview of the
MRF24J40MA/MB PICtail/PICtail Plus Daughter Board, including board contents
and features.
• Chapter 2. “Getting Started” This chapter describes how to start using your
MRF24J40MA/MB PICtail/PICtail Plus Daughter Board.
• Appendix A. “MRF24J40MA/MB PICtail/PICtail Plus Daughter Board Sche-
matic” This appendix contains the schematics, PCB information and Bill of
Materials for the MRF24J40MA/MB PICtail/PICtail Plus Daughter Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.