Datasheet

Getting Started

3.4.4 Programming the dsPIC33FJ16GS502 Device

To program the device:

1. From the Debugger, select Debugger>Program.

The Output (Program Memory window), as shown in Figure 3-19, displays the

program statuses as they appear.

FIGURE 3-19: PROGRAMMING THE dsPIC33FJ16GS502 DEVICE

2. Observe the process in the Output window. When MPLAB ICD 2 Ready appears,

the device is programmed and ready to run.

3. Select Debugger>Reset

to reset the code.

4. Select Debugger>Run

to run the code.