Datasheet

Getting Started

3.3.1 Building the Code

To specify the Project Build Options:

1. Select Build Options>Project from the Project menu. The Build Options For

Project “Buck 1 Voltage Mode.mcp” dialog appears, as shown in Figure 3-9.

FIGURE 3-9: BUILD OPTIONS

2. Select Assemble/Compile/Link in the project directory, and then click OK. This

completes the code build process.

3.3.2 Linking the ICD 2 for Debugging

Select the Debug option from the drop-down menu of MPLAB IDE, as shown in

Figure 3-10, so the linker will build the code for debugging. This sets aside the RAM for

the MPLAB ICD 2 for use during debugging. If this is not performed, the MPLAB ICD 2

will not function properly in Debug mode.