Datasheet

Getting Started
© 2008 Microchip Technology Inc. DS70336A-page 27
3.2.1.1 PROJECT WIZARD STEP ONE – SELECTING THE DEVICE
1. Start MPLAB IDE.
2. Close any open workspace (File>Close Workspace
).
3. Select Project>Project Wizard
. The Welcome dialog appears.
4. Click Next to continue. The Select a device dialog appears.
5. From the Device drop-down list, select the required device, as shown in
Figure 3-1.
FIGURE 3-1: SELECT A DEVICE
6. Click Next to continue. The Select a language toolsuite dialog appears, as
shown in Figure 3-2.
Note: While using the Explorer 16 Development Board, select the
dsPIC33FJ16GS504 device.